Sunday, October 12, 2008

10 keyboard shortcuts to improve your Linux experience

(link)
A few simple keyboard shortcuts can make your work in Linux far more efficient. Jack Wallen runs through 10 of his favorites, for both desktop environments and window managers.

Many Linux users are keyboard cowboys, breaking out in a cold, cold sweat when their nimble fingers have to leave the keyboard for the mouse. But even if you’re not like that, you can still employ some of those fantastic keyboard shortcuts that help make Linux commuting efficient. To get you started, here are my 10 favorite Linux keyboard shortcuts. Disclaimer: Some of these shortcuts will be desktop environment- or window manager-specific.

Note: This information is also available as a PDF download.

1: Ctl + Alt + Backspace
Use this shortcut when X isn’t responding or a program has locked up your desktop and you can’t get anything to respond. This combination instantly logs you out of X, taking you back to the login screen. It works with all desktop environments and window managers.

2: Ctrl + Alt + Delete
This is the big kahuna. If all else fails and you just need to reboot, you can hit this combination to instantly start the reboot process. All data will be lost, so use it wisely. This combination works in all desktop environments and all window managers.

3: Alt + Tab
This handy shortcut allows you to cycle through all open windows, stopping on the window you want to have focus. In other words, you don’t have to grab your mouse and click (or hover, depending upon your focus configuration) to give a window focus. To cycle through the windows, hold down the Alt key and then press the Tab key until you land on the window you want. This shortcut works in most desktop environments and window managers.

4: Ctrl + Alt + F*
This is one of those mack-daddy shortcuts you very well might need to use. It switches to various virtual terminals. The default terminal you’re working in is 6. So you can switch to another terminal by holding down Ctrl + Alt and hitting F1, F2, F3, F4, F5, F7, etc. Now these are virtual terminals, so if you already have a graphical interface going, you’ll only be able to work in a text-based terminal window. This is really good for debugging problems with the desktop or killing frozen applications when you don’t want to kill X completely.
(My note: At least in Ubuntu, with Ctrl + Alt + F7 you can return to the X environment from any of the virtual terminals. The virtual terminals are only from F1 to F6. The F8 shows you the last messages before going into X.)

5: Alt + Arrow key
If you’re using Linux, you probably know about the pager that allows you to have multiple desktops at one time. Instead of having to move your mouse to the edge of a screen, you can hit Alt and either the left or right arrow key to move from one desktop to another. This works in all desktop environments and window managers.

The following apply only to terminal (aka console) windows
6: Ctrl + a and Ctrl + e
If you are working in a text editor like Nano (from within a terminal window), you can get to the beginning of a line with Ctrl + a and the end of a line with Ctrl + e. These do not work in GUI applications. In a GUI application (such as OpenOffice), these combinations will work as they would in a normal desktop world. (For example, Ctrl + a will highlight all the text on a page.)

7: Ctrl + c
When you have a process running in a terminal window (say you’re following a process with the tail + f command), you can kill that process with the Ctrl + c combination.

8: Ctrl + z
This will zombie an application. If you have a process running in a terminal and you want the terminal back but don’t want to kill the application, you can hit Ctrl + z to send the process to the background. To get the process back, type fg.

9: Arrow up or Arrow down
The up or down arrow key, when in a terminal window, cycles through the history of commands you have issued in the terminal window. This is helpful for two reasons: You don’t have to retype commands all the time and you can more easily recall what commands have been run recently.

10: Ctrl + r
This is a handy command search tool. When you hit Ctrl + r, you are prompted to enter a character (or string of characters). You’ll have returned to you any previously issued command with that character or combination within. This is helpful because it does not discriminate between commands and switches. So if you can only remember a switch you used, you can enter that and the command will appear. When the command shows up you want, hit Enter to execute.
The keyboard advantage

These 10 simple Linux keyboard shortcuts will help you make your work in Linux far more efficient. Yes, there are plenty more beyond this list. Some shortcuts are specific to a particular environment, and many desktops or window managers allow you to create your own keyboard shortcuts. Use that feature, and you’ll find yourself working far more efficiently without having to move your hand from key to mouse and back.

Linux Shortcuts and Commands:

Linux Newbie Administrator Guide
by Stan and Peter Klimas (link)

This is a practical selection of the commands we use most often. Press to see the listing of all available command (on your PATH). On my small home system, it says there are 2595 executables on my PATH. Many of these "commands" can be accessed from your favourite GUI front-end (probably KDE or Gnome) by clicking on the right menu or button. They can all be run from the command line. Programs that require GUI have to be run from a terminal opened under a GUI.

Legend:
<> = single special or function key on the keyboard. For example indicates the "control" key.
italic = name of the file or variable you probably want to substitute with your own.
fixed width = in-line Linux commands and filenames.

Notes for the UNIX Clueless:
1. LINUX IS CASE-SENSITIVE. For example: Netscape, NETSCAPE and nEtscape are three different commands. Also my_filE, my_file, and my_FILE are three different files. Your user login name and password are also case sensitive. (This goes with the tradition of UNIX and the "c" programming language being case sensitive.)
2. Filenames can be up to 256 characters long and can contain letters, numbers, "." (dot), "_" (underscore), "-" (dash), plus some other not recommended characters.
3. Files with names starting with "." are normally not shown by the ls (list) or dir commands. Think of these files as "hidden". Use ls -a (list with the option "all") to see these files.
4. "/" is an equivalent to DOS "\" (root directory, meaning the parent of all other directories).
5. Under Linux, all directories appear under a single directory tree (there are no DOS-style drive letters).
6. In a configuration file, a line starting with # is a comment.

7.1 Linux essential shortcuts and sanity commands


Switch to the first text terminal. Under Linux you can have several (6 in standard setup) terminals opened at the same time.

(n=1..6)
Switch to the nth text terminal.

tty
Print the name of the terminal in which you are typing this command.


Switch to the first GUI terminal (if X-windows is running on this terminal).

(n=7..12)
Switch to the nth GUI terminal (if a GUI terminal is running on screen n-1). On default, nothing is running on terminals
8 to 12, but you can run another server there.


(In a text terminal) Autocomplete the command if there is only one option, or else show all the available options.
THIS SHORTCUT IS GREAT! It even works at LILO prompt!


Scroll and edit the command history. Press to execute.


Scroll terminal output up. Work also at the login prompt, so you can scroll through your bootup messages.


Scroll terminal output down.

<+>
(in X-windows) Change to the next X-server resolution (if you set up the X-server to more than one resolution). For multiple resolutions on my standard SVGA card/monitor, I have the following line in the file /etc/X11/XF86Config (the first resolution starts on default, the largest determines the size of the "virtual screen"):
Modes "1024x768" "800x600" "640x480" "512x384" "480x300" "400x300" "1152x864"

<->
(in X-windows) Change to the previous X-server resolution.


(in X-windows) Kill the current X-windows server. Use if the X-windows server crushes and cannot be exited normally.


Shut down the system and reboot. This is the normal shutdown command for a user at the text-mode console. Don't just press the "reset" button for shutdown!

c
Kill the current process (mostly in the text mode for small applications).

d
Log out from the current terminal. See also the next command.

d
Send [End-of-File] to the current process. Don't press it twice else you also log out (see the previous command).

s
Stop the transfer to the terminal.

q
Resume the transfer to the terminal. Try if your terminal mysteriously stops responding.

z
Send the current process to the background.

exit
Logout. I can also use logout for the same effect. (If you have started a second shell, e.g., using bash the second shell will be exited and you will be back in the first shell, not logged out.)

reset
Restore a screwed-up terminal (a terminal showing funny characters) to default setting. Use if you tried to "cat" a binary file. You may not be able to see the command as you type it.


Paste the text which is currently highlighted somewhere else. This is the normal "copy-paste" operation in Linux. (It doesn't work with Netscape and WordPerfect which use the MS Windows-style "copy-paste". It does work in the text terminal if you enabled "gpm" service using "setup".) Best used with a Linux-ready 3-button mouse (Logitech or similar) or else set "3-mouse button emulation").

~
(tilde) My home directory (normally the directory /home/my_login_name). For example, the command cd ~/my_dir will change my working directory to the subdirectory "my_dir" under my home directory. Typing just "cd" alone is an equivalent of the command "cd ~".

.
(dot) Current directory. For example, ./my_program will attempt to execute the file "my_program" located in your current working directory.

..
(two dots) Directory parent to the current one. For example, the command cd .. will change my current working directory one one level up.

7.2 Common Linux commands--system info

pwd
Print working directory, i.e., display the name of my current directory on the screen.

hostname
Print the name of the local host (the machine on which you are working). Use netconf (as root) to change the name of the machine.

whoami
Print my login name.

id username
Print user id (uid) and his/her group id (gid), effective id (if different than the real id) and the supplementary groups.

date
Print or change the operating system date and time. E.g., I could change the date and time to 2000-12-31 23:57 using this command:
date 123123572000
To set the hardware (BIOS) clock from the system (Linux) clock, use the command (as root) setclock

time
Determine the amount of time that it takes for a process to complete + other info. Don't confuse it with the date command. E.g. I can find out how long it takes to display a directory content using:
time ls

who
Determine the users logged on the machine.

rwho -a
(=remote who) Determine all users logged on your network. The rwho service must be enabled for this command to run. If it isn't, run setup as root to enable "rwho".

finger user_name
System info about a user. Try: finger root

last
Show listing of users last logged-in on your system.

history | more
Show the last (1000 or so) commands executed from the command line on the current account. The "| more" causes the display to stop after each screenful.

uptime
Show the amount of time since the last reboot.

ps
(=print status) List the processes currently run by the current user.

ps axu | more
List all the processes currently running, even those without the controlling terminal, together with the name of the user that owns each process.

top
Keep listing the currently running processes, sorted by cpu usage (top users first). In KDE, you can get GUI-based Ktop from "K"menu under "System"-"Task Manager" (or by executing "ktop" in an X-terminal).

uname -a
(= Unix name with option "all") Info on your (local) server. I can also use guname (in X-window terminal) to display the info more nicely.

free
Memory info (in kilobytes).

df -h
(=disk free) Print disk info about all the filesystems (in human-readable form)

du / -bh | more
(=disk usage) Print detailed disk usage for each subdirectory starting at the "/" (root) directory (in human legible form).

cat /proc/cpuinfo
Cpu info--it show the content of the file cpuinfo. Note that the files in the /proc directory are not real files--they are hooks to look at information available to the kernel.

cat /proc/interrupts
List the interrupts in use.

cat /proc/version
Linux version and other info

cat /proc/filesystems
Show the types of filesystems currently in use.

cat /etc/printcap
Show the setup of printers.

lsmod
(As root. Use /sbin/lsmod to execute this command when you are a non-root user.) Show the kernel modules currently loaded.

set|more
Show the current user environment.

echo $PATH
Show the content of the environment variable "PATH". This command can be used to show other environment variables as well. Use "set" to see the full environment.

dmesg | less
Print kernel messages (the content of the so-called kernel ring buffer). Press "q" to quit "less". Use less /var/log/dmesg to see what "dmesg" dumped into this file right after the last system bootup.

7.3 Basic operations

any_command --help |more
Display a brief help on a command (works with most commands). "--help" works similar to DOS "/h" switch. The "more" pipe is needed if the output is longer than one screen.

man topic
Display the contents of the system manual pages (help) on the topic. Try man man first. Press "q" to quit the viewer. The command info topic works similar and may contain more up-to-date information. Manual pages can be hard to read. Try any_command --help for short, easy to digest help on a command. If more info needed, have a look to the directory /usr/doc. To display manual page from a specific section, I may use something like in this example: man 3 exit (this displays an info on the command exit from section 3 of the manual pages).

apropos topic
Give me the list of the commands that have something to to do with my topic.

help command
Display brief info on a bash (shell) build-in command.

ls
List the content of the current directory. Under Linux, the command "dir" is an alias to ls. Many users have "ls" to be an alias to "ls --color".

ls -al |more
List the content of the current directory, all files (also those starting with a dot), and in a long form. Pipe the output through the "more" command, so that the display pauses after each screenful.

cd directory
Change directory. Using "cd" without the directory name will take you to your home directory. "cd -" will take you to your previous directory and is a convenient way to toggle between two directories. "cd .." will take you one directory up.

cp source destination
Copy files. E.g., cp /home/stan/existing_file_name . will copy a file to my current working directory. Use the "-r" option (for recursive) to copy the contents of whole directories, e.g. , cp -r my_existing/dir/ ~ will copy a subdirectory under my current working directory to my home directory.

mcopy source destination
Copy a file from/to a DOS filesystem (no mounting necessary). E.g., mcopy a:\autoexec.bat ~/junk . See man mtools for related commands: mdir, mcd, mren, mmove, mdel, mmd, mrd, mformat ....

mv source destination
Move or rename files. The same command is used for moving and renaming files and directories.

ln source destination
Create a hard link called destination to the file called source. The link appears as a copy of the original files, but in reality only one copy of the file is kept, just two (or more) directory entries point to it. Any changes the file are automatically visible throughout. When one directory entry is removed, the other(s) stay(s) intact. The limitation of the hard links are: the files have to be on the same filesystem, hard links to directories or special files are impossible.

ln -s source destination
Create a symbolic (soft) link called "destination" to the file called "source". The symbolic link just specifies a path where to look for the file. In contradistinction to hard links, the source and destination don't not have to tbe on the same filesystem. In comparison to hard links, the drawback of symbolic links are: if the original file is removed, the link is "broken", symbolic links can also create circular references (like circular references in spreadsheets or databases, e.g., "a" points to "b" and "b" points back to "a").

rm files
Remove (delete) files. You must own the file in order to be able to remove it. On many systems, you will be asked or confirmation of deleation, if you don't want this, use the "-f" (=force) option, e.g., rm -f * will remove all files in my current working directory, no questions asked.

mkdir directory
Make a new directory.

rmdir directory
Remove an empty directory.

rm -r files
(recursive remove) Remove files, directories, and their subdirectories. Careful with this command as root--you can easily remove all files on the system with such a command executed on the top of your directory tree, and there is no undelete in Linux (yet). But if you really wanted to do it (reconsider), here is how (as root): rm -rf /*

cat filename | more
View the content of a text file called "filename", one page a time. The "|" is the "pipe" symbol (on many American keyboards it shares the key with "\") The pipe makes the output stop after each screenful. For long files, it is sometimes convenient to use the commands head and tail that display just the beginning and the end of the file. If you happened to use "cat" a binary file and your terminal displays funny characters afterwards, you can restore it with the command "reset".

less filename
Scroll through a content of a text file. Press q when done. "Less" is roughly equivalent to "more" , the command you know from DOS, although very often "less" is more convenient than "more".

pico filename
Edit a text file using the simple and standard text editor called pico.

pico -w filename
Edit a text file, while disabling the long line wrap. Handy for editing configuration files, e.g. /etc/fstab.

find / -name "filename"
Find the file called "filename" on your filesystem starting the search from the root directory "/". The "filename" may contain wildcards (*,?).

locate filename
Find the file name of which contains the string "filename". Easier and faster than the previous command but depends on a database that normally rebuilds at night.

./program_name
Run an executable in the current directory, which is not on your PATH.

touch filename
Change the date/time stamp of the file filename to the current time. Create an empty file if the file does not exist.

xinit
Start a barebone X-windows server (without a windows manager).

startx
Start an X-windows server and the default windows manager. Works like typing "win" under DOS with Win3.1

startx -- :1
Start another X-windows session on the display 1 (the default is opened on display 0). You can have several GUI terminals running concurrently. Switch between them using , , etc.

xterm
(in X terminal) Run a simple X-windows terminal. Typing exit will close it. There are other, more advanced "virtual" terminals for X-windows. I like the popular ones: konsole and kvt (both come with kde) and gnome-terminal (comes with gnome). If you need something really fancy-looking, try Eterm.

xboing
(in X terminal). Very nice, old-fashioned game. Many small games/programs are probably installed on your system. I also like xboard (chess).

shutdown -h now
(as root) Shut down the system to a halt. Mostly used for a remote shutdown. Use for a shutdown at the console (which can be done by any user).

halt
reboot
(as root, two commands) Halt or reboot the machine. Used for remote shutdown, simpler to type than the previous command.

Network apps

netscape
(in X terminal) Run netscape (requires a separate Netscape installation). The current versions of Netscape (4.x) are known to be big and buggy. They occasionally crash by vanishing (no other harm done). Also, when not connected to the network , Netscape likes to refuse to do anything (looks like it hanged)-it revives when you connect.

netscape -display host:0.0
(in X terminal) Run netscape on the current machine and direct the output to machine named "host" display 0 screen 0. Your current machine must have a permission to display on the machine "host" (typically given by executing the command xhost current_machine_name in the xterminal of the machine host. Other X-windows program can be run remotely the same way.

lynx file.html
View an html file or browse the net from the text mode.

pine
A good text-mode mail reader. Another good and standard one is elm. Your Netscape mail will read the mail from your Internet account. pine will let you read the "local" mail, e.g. the mail your son or a cron process sends to you from a computer on your home network. The command mail could also be used for reading/composing mail, but it would be inconvenient--it is meant to be used in scripts for automation.

elm
A good tex-mode mail reader. See the previous command.

mutt
A really basic but extremally useful and fast mail reader.

mail
A basic operating system tool for e-mail. Look at the previous commands for a better e-mail reader. mail is good if you wanted to send an e-mail from a shell script.

licq
(in X term) An icq "instant messaging" client. Another good one is kxicq. Older distributions don't have an icq client installed, you have to do download one and install it.

talk username1
Talk to another user currently logged on your machine (or use "talk username1@machinename" to talk to a user on a different computer) . To accept the invitation to the conversation, type the command "talk username2". If somebody is trying to talk to you and it disrupts your work, your may use the command "mesg n" to refuse accepting messages. You may want to use "who" or "rwho" to determine the users who are currently logged-in.

mc
Launch the "Midnight Commander" file manager (looks like "Norton Commander" for Linux).

telnet server
Connect to another machine using the TELNET protocol. Use a remote machine name or IP address. You will be prompted for your login name and password--you must have an account on the remote machine to login. Telnet will connect you to another machine and let you operate on it as if you were sitting at its keyboard (almost). Telnet is not very secure--everything you type goes in open text, even your password!

rlogin server
(=remote login) Connect to another machine. The login name/password from your current session is used; if it fails you are prompted for a password.

rsh server
(=remote shell) Yet another way to connect to a remote machine. The login name/password from your current session is used; if it fails you are prompted for a password.

ftp server
Ftp another machine. (There is also ncftp which adds extra features and gftp for GUI .) Ftp is good for copying files to/from a remote machine. Try user "anonymous" if you don't have an account on the remote server. After connection, use "?" to see the list of available ftp commands. The essential ftp command are: ls (see the files on the remote system), ASCII, binary (set the file transfer mode to either text or binary, important that you select the proper one ), get (copy a file from the remote system to the local system), mget (get many files at once), put (copy a file from the local system to the remote system), mput (put many files at once), bye (disconnect). For automation in a script, you may want to use ncftpput and ncftpget, for example:
ncftpput -u my_user_name -p my_password -a remote.host.domain remote_dir *local.html

minicom
Minicom program (looks like "Procomm for Linux").

File (de)compression

tar -zxvf filename.tar.gz
(=tape archiver) Untar a tarred and compressed tarball (*.tar.gz or *.tgz) that you downloaded from the Internet.

tar -xvf filename.tar
Untar a tarred but uncompressed tarball (*.tar).

gunzip filename.gz
Decompress a zipped file (*.gz" or *.z). Use gzip (also zip or compress) if you wanted to compress files to this file format.

bunzip2 filename.bz2
(=big unzip) Decompress a file (*.bz2) zipped with bzip2 compression utility. Used for big files.

unzip filename.zip
Decompress a file (*.zip) zipped with a compression utility compatible with PKZIP for DOS.

unarj e filename.arj
Extract the content of an *.arj archive.

uudecode -o outputfile filename
Decode a file encoded with uuencode. uu-encoded files are typically used for transfer of non-text files in e-mail (uuencode transforms any file into an ASCII file).

7.4 Process control

ps
(=print status) Display the list of currently running processes with their process IDs (PID) numbers. Use ps axu to see all processes currently running on your system (also those of other users or without a controlling terminal), each with the name of the owner. Use "top" to keep listing the processes currently running.

fg PID
Bring a background or stopped process to the foreground.

bg PID
Send the process to the background. Opposite to fg. The same can be accomplished with z. If you have stopped jobs, you have to type exit twice in row to log out.

any_command&
Run any command in the background (the symbol "&" means "run the proceeding command in the background").

batch any_command
Run any command (usually one that is going to take more time) when the system load is low. I can logout, and the process will keep running.

at 17:00
Execute a command at a specified time. You will be prompted for the command(s) to run, until you press d.

kill PID
Force a process shutdown. First determine the PID of the process to kill using ps.

killall program_name
Kill program(s) by name.

xkill
(in an xwindow terminal) Kill a GUI-based program with mouse. (Point with your mouse cursor at the window of the process you want to kill and click.)

lpc
(as root) Check and control the printer(s). Type "?" to see the list of available commands.

lpq
Show the content of the printer queue. Under KDE (X-Windows), you may use GUI-based "Printer Queue" available from "K"menu-Utilities.

lprm job_number
Remove a printing job "job_number" from the queue.

nice program_name
Run program_name adjusting its priority. Since the priority is not specified in this example, it will be adjusted by 10 (the process will run slower), from the default value (usually 0). The lower the number (of "niceness" to other users on the system), the higher the priority. The priority value may be in the range -20 to 19. Only root may specify negative values. Use "top" to display the priorities of the running processes.

renice -1 PID
(as root) Change the priority of a running process to -1. Normal users can only adjust processes they own, and only up from the current value (make them run slower).

c, z, s, and q also belong to this chapter but they were described previously. In short they mean: stop the current command, send the current command to the background, stop the data transfer, resume the data transfer.

7.5 Basic administration commands

printtool
(as root in X-terminal) Configuration tool for your printer(s). Settings go to the file /etc/printcap.

setup
(as root) Configure mouse, soundcard, keyboard, X-windows, system services. There are many distibution-specific configuration utilities, setup is the default on RedHat. Mandrake 7.0 offers very nice DrakConf .

linuxconfig
(as root, either in text or graphical mode). You can access and change hundreds of setting from it. Very powerful--don't change too many things at the same time, and be careful with changing entries you don't understand.

xvidtune
(in X-terminal). Adjust the settings of the graphical display for all resolutions so as to eliminate black bands, shift the display right/left/up/down, etc. (First use the knobs on your monitor to fit your text mode correctly on the screen.) To make the changes permanent, display the frequencies on the screen and transfer them to the setup file /etc/X11/XF86Config.

alias ls="ls --color=tty"
Create an alias for the command "ls" to enhance its format with color. In this example, the alias is also called "ls" and the "color" option is only envoke when the output is done to a terminal (not to files). Put the alias into the file /etc/bashrc if you would like the alias to be always accessible to all users on the system. Type "alias" alone to see the list of aliases on your system.

adduser user_name
Create a new account (you must be root). E.g., adduser barbara Don't forget to set up the password for the new user in the next step. The user home directory is /home/user_name.

useradd user_name
The same as the command " adduser user_name ".

userdel user_name
Remove an account (you must be a root). The user's home directory and the undelivered mail must be dealt with separately (manually because you have to decide what to do with the files).

groupadd group_name
Create a new group on your system. Non-essential but can be handy even on a home machine with a small number of users.

passwd
Change the password on your current account. If you are root, you can change the password for any user using: passwd user_name

chmod perm filename
(=change mode) Change the file access permission for the files you own (unless you are root in which case you can change any file). You can make a file accessible in three modes: read (r), write (w), execute (x) to three classes of users: owner (u), members of the same group as the owner (g), others on the system (o). Check the current access permissions using:
ls -l filename
If the file is accessible to all users in all modes it will show:
rwxrwxrwx
The first triplet shows the file permission for the owner of the file, the second for his/her group, the third for others. A "no" permission is shown as "-".
E.g., this command will add the permission to read the file "junk" to all (=user+group+others):
chmod a+r junk
This command will remove the permission to execute the file junk from others:
chmod o-x junk
Also try here for more info.
You can set the default file permissions for the news files that you create using the command umask (see man umask).

chown new_ownername filename
chgrp new_groupname filename
Change the file owner and group. You should use these two commands after you copy a file for use by somebody else.

su
(=substitute user id) Assume the superuser (=root) identity (you will be prompted for the password). Type "exit" to return you to your previous login. Don't habitually work on your machine as root. The root account is for administration and the su command is to ease your access to the administration account when you require it. You can also use "su" to assume any other user identity, e.g. su barbara will make me "barbara" (password required unless I am a superuser).

kernelcfg
(as root in X terminal). GUI to to add/remove kernel modules. You can do the same from the command line using the command "insmod", but "insmode" is less "newbie-friendly".

lsmod
List currently loaded kernel modules. A module is like a device driver--it provides operating system kernel support for a particular piece of hardware or feature.

modprobe -l |more
List all the modules available for your kernel. The available modules are determined by how your Linux kernel was compliled. Every possible module/feature can be compiled on linux as either "hard wired" (fast, non-removable), "module" (maybe slower, but loaded/removable on demand), or "no" (no support for this feature at all).

insmod parport
insmod ppa
(as root) Insert modules into the kernel (a module is roughly an equivalent of a DOS device driver). This example shows how to insert the modules for support of the external parallel port zip drive (it appears to be a problem to get the external zip drive to work in any other way under RH6.0 ).

rmmod module_name
(as root, not essential). Remove the module module_name from the kernel.

setserial /dev/cua0 port 0x03f8 irq 4
(as root) Set a serial port to a non-standard setting. The example here shows the standard setting for the first serial port (cua0 or ttyS0). The standard PC settings for the second serial port (cua1or ttyS1) are: address of i/o port 0x02f8, irq 3. The third serial port (cua2 or ttyS2): 0x03e8, irq 4. The forth serial port (cua3 or ttyS3): 0x02e8, irq 3. Add your setting to /etc/rc.d/rc.local if you want it to be set at the boot time. See man setserial for good a overview.

fdisk
(as root) Linux hard drive partitioning utility (DOS has a utility with the same name).

cd /usr/src/linux-2.0.36
make xconfig
(as root in X terminal). Nice GUI front-end for configuration of the kernel options in preparation for compilation of your customized kernel. (The directory name contains the version of your Linux kernel so you may need to modify the directory name if your Linux kernel version is different than 2.0.36 used in this example. You also need the "Tk" interpreter and the kernel source code installed. ) The alternatives to "make xconfig" are: "make config" (runs a scripts that asks you questions in the text mode) and "make menuconfig" (runs a text-based menu-driven configuration utility). Try: less /usr/doc/HOWTO/Kernel-HOWTO for more information.
After the configuration, you may choose to proceed with kernel compilation of the new kernel by issuing the following commands:
make dep
make zImage
The last command will take some time to complete (maybe 0.5 h, depending on your hardware). It produces the file "zImage", which is your new Linux kernel. Next:
make modules
make modules_install
Read: /usr/doc/HOWTO/Kernel-HOWTO for information on how to install the new kernel. You will probably also find it useful to read "man depmode". Configuration, compilation and installation of a new kernel is not difficult but it CAN lead to problems if you don't know what you are doing.
Compilation of a kernel is a good way to test your hardware, because it involves a massive amount of computing. If your hardware is "flaky", you will most likely receive the "signal 11" error (read the beatiful /usr/doc/FAQ/txt/GCC-SIG11-FAQ). See this for details on kernel upgrade.

depmod -a
(as root) Build the module dependency table for the kernel. This can, for example, be useful after installing and booting a new kernel. Use "modprobe -a" to load the modules.

ldconfig
(as root) Re-create the bindings and the cache for the loader of dynamic libraries ("ld"). You may want to run ldconfig after an installation of new dynamically linked libraries on your system. (It is also re-run every time you boot the computer, so if you reboot you don't have to run it manually.)

mknod /dev/fd0 b 2 0
(=make node, as root) Create a device file. This example shows how to create a device file associated with your first floppy drive and could be useful if you happened to accidentally erase it. The options are: b=block mode device (c=character mode device, p=FIFO device, u=unbuffered character mode device). The two integers specify the major and the minor device number.

fdformat /dev/fd0H1440
mkfs -c -t ext2
(=floppy disk format, two commands, as root) Perform a low-level formatting of a floppy in the first floppy drive (/dev/fd0), high density (1440 kB). Then make a Linux filesystem (-t ext2), checking/marking bad blocks (-c ). Making the files system is an equivalent to the high-level format.

badblocks /dev/fd01440 1440
(as root) Check a high-density floppy for bad blocks and display the results on the screen. The parameter "1440" specifies that 1440 blocks are to be checked. This command does not modify the floppy.

fsck -t ext2 /dev/hda2
(=file system check, as root) Check and repair a filesystem. The example uses the partition hda2, filesystem type ext2.

dd if=/dev/fd0H1440 of=floppy_image
dd if=floppy_image of=/dev/fd0H1440
(two commands, dd="data duplicator") Create an image of a floppy to the file called "floppy_image" in the current directory. Then copy floppy_image (file) to another floppy disk. Works like DOS "DISKCOPY".

Program installation

rpm -ivh filename.rpm
(=RedhatPackageManager, install, verbose, hashes displayed to show progress, as root.) Install a content of RedHat rpm package(s) and print info on what happened. Keep reading if you prefer a GUI installation.

rpm -qpi filename.rpm
(=RedhatPackageManager, query, package, list.) Read the info on the content of a yet uninstalled package filename.rpm.

rpm -qpl filename.rpm
(=RedhatPackageManager, query, package, information.) List the files contained in a yet uninstalled package filename.rpm.

rpm -qf filename
(=RedhatPackageManager, query, file.) Find out the name of the *.rpm package to which the file filename (on your hardrive) belongs.

rpm -e packagename
(=RedhatPackageManager, erase=uninstall.) Uninstall a package pagckagename. Packagname is the same as the beginning of the *.rpm package file but without the dash and version number.

kpackage
gnorpm
glint
(in X terminal, as root if you want to be able to install packages) GUI fronts to the Red Hat Package Manager (rpm). "glint" comes with RH5.2, "gnorpm" with RH6.0, "kpackage" comes with RH6.1 or must be installed separately but is the best of the three. Use any of them to view which software packages are installed on your system and the what not-yet-installed packages are available on your RedHat CD, display the info about the packages, and install them if you want (installation must be done as root).

Accessing drives/partitions

mount
See here for details on mounting drives. Examples are shown in the next commands.

mount -t auto /dev/fd0 /mnt/floppy
(as root) Mount the floppy. The directory /mnt/floppy must exist, be empty and NOT be your current directory.

mount -t auto /dev/cdrom /mnt/cdrom
(as root) Mount the CD. You may need to create/modify the /dev/cdrom file depending where your CDROM is. The directory /mnt/cdrom must exist, be empty and NOT be your current directory.

mount /mnt/floppy
(as user or root) Mount a floppy as user. The file /etc/fstab must be set up to do this. The directory /mnt/floppy must not be your current directory.

mount /mnt/cdrom
(as user or root) Mount a CD as user. The file /etc/fstab must be set up to do this. The directory /mnt/cdrom must not be your current directory.

umount /mnt/floppy
Unmount the floppy. The directory /mnt/floppy must not be your (or anybody else's) current working directory. Depending on your setup, you might not be able to unmount a drive that you didn't mount.

7.6 Network administration tools

netconf
(as root) A very good menu-driven setup of your network.

pingmachine_name
Check if you can contact another machine (give the machine's name or IP), press C when done (it keeps going).

route -n
Show the kernel routing table.

nslookup host_to_find
Query your default domain name server (DNS) for an Internet name (or IP number) host_to_find. This way you can check if your DNS works. You can also find out the name of the host of which you only know the IP number.

traceroute host_to_trace
Have a look how you messages trave to host_to_trace (which is either a host name or IP number).

ipfwadm -F -p m
(for RH5.2, seen next command for RH6.0) Set up the firewall IP forwarding policy to masquerading. (Not very secure but simple.) Purpose: all computers from your home network will appear to the outside world as one very busy machine and, for example, you will be allowed to browse the Internet from all computers at once.

echo 1 > /proc/sys/net/ipv4/ip_forward
ipfwadm-wrapper -F -p deny
ipfwadm-wrapper -F -a m -S xxx.xxx.xxx.0/24 -D 0.0.0.0/0
(three commands, RH6.0). Does the same as the previous command. Substitute the "x"s with digits of your class "C" IP address that you assigned to your home network. See here for more details. In RH6.1, masquarading seems broken to me--I think I will install Mandrake Linux:).

ifconfig
(as root) Display info on the network interfaces currently active (ethernet, ppp, etc). Your first ethernet should show up as eth0, second as eth1, etc, first ppp over modem as ppp0, second as ppp1, etc. The "lo" is the "loopback only" interface which should be always active. Use the options (see ifconfig --help) to configure the interfaces.

ifup interface_name
(/sbin/ifup to it run as a user) Startup a network interface. E.g.:
ifup eth0
ifup ppp0
Users can start up or shutdown the ppp interface only when the right permission was checked during the ppp setup (using netconf ). To start a ppp interface (dial-up connection), I normally use kppp available under kde menu "internet".

ifdown interface_name
(/sbin/ifdown to run it as a user). Shut down the network interface. E.g.: ifdown ppp0 Also, see the previous command.

netstat | more
Displays a lot (too much?) information on the status of your network.

Music-related commands

cdplay play 1
Play the first track from a audio CD.

eject
Get a free coffee cup holder :))). (Eject the CD ROM tray).

play my_file.wav
Play a wave file.

mpg123 my_file.mp3
Play an mp3 file.

mpg123 -w my_file.wav my_file.mp3
Create a wave audio file from an mp3 audio file.

knapster
(in X terminal) Start the program to downolad mp3 files that other users of napster have displayed for downloading. Really cool!

cdparanoia -B "1-"
(CD ripper) Read the contents of an audio CD and save it into wavefiles in the current directories, one track per wavefile. The "1-"
means "from track 1 to the last". -B forces putting each track into a separate file.

playmidi my_file.mid
Play a midi file. playmidi -r my_file.mid will display text mode effects on the screen.

sox
(argument not given here) Convert from almost any audio file format to another (but not mp3s). See man sox.

Graphics-related commands

kghostview my_file.ps
Display a postscript file on screen. I can also use the older-looking ghostview or gv for the same end effect.

ps2pdf my_file.ps my_file.pdf
Make a pdf (Adobe portable document format) file from a postscript file.

gimp
(in X terminal) A humble looking but very powerful image processor. Takes some learning to use, but it is great for artists, there is almost nothing you can't do with gimp. Use your mouse right button to get local menus, and learn how to use layers. Save your file in the native gimp file format *.xcf (to preserve layers) and only then flatten it and save as png (or whatever). There is a large user manual /usr/

gphoto
(in X terminal) Powerful photo editor.

giftopnm my_file.giff > my_file.pnm
pnmtopng my_file.pnm > my_file.png
Convert the propriatory giff graphics into a raw, portable pnm file. Then convert the pnm into a png file, which is a newer and better standard for Internet pictures (better technically plus there is no danger of being sued by the owner of giff patents).